High Speed Thread Rolling Machine Series
|
Machine type
|
Maximum diameter of the system
|
Maximum system length
|
Dental board specifications
|
Production per minute
|
Horsepower
|
Pump
|
Net weight
|
|
R4-25T
|
M4
|
25
|
80/65×20×25
|
280
|
1.5KW
|
90W
|
400kg
|
|
R4-40T
|
M5
|
45
|
89/76×25×40
|
250
|
2.2KW
|
90W
|
650kg
|
|
R5-65T
|
M6
|
65
|
90/105×25×65
|
130
|
2.2KW
|
90W
|
900kg
|
|
R6-70T
|
M8
|
70
|
110/125×25×70
|
120
|
3KW
|
90W
|
1100kg
|
|
R8-80T
|
M10
|
80
|
150/170×30×80
|
100
|
4KW
|
90W
|
1200kg
|
|
R10-100T
|
M12
|
100
|
150/170×30×100
|
90
|
5.5KW
|
90W
|
1500kg
|
2 thread rolling machines thread rolling rod diameter has a defined range, in the normal range of the load machine, the machine can work efficiently and effectively protect the machine to extend its life. Therefore, under normal circumstances threading rod diameter shall not exceed the prescribed standard, that is not overloaded with work.
3 cups of the machine with oil drip lubrication and forced oil lubrication pump. Sports slider cup drip with oil lubrication, rub board using pumps to force oil teeth. Work, the slider must be lubricated, or they will strain the slider on the side of copper; the same time, to reduce rubbing teeth plate temperature, protect tooth plate, also called oil fully. Therefore, make sure the boot machine before the cup there is enough oil lubricants, fuel pump working properly. Course of their work and often fuel. Note: the oil cup with adjustable flow.
4 slide at high speeds, there is a certain wear and tear, machine work to ensure accuracy, required every six months once the slider to adjust the gap.
5 round dial material used to make the necessary processing according to the product or custom.
6. The thread rolling machine motor wheel is divided into two, its operating speed according to workpiece requirements through the replacement of the belt position to make the necessary adjustments.
1 thread rolling machine is a standard or non-standard thread rolling special machinery.
